No problem and it’s less hassle for me anyway as I’m always time limited.. just I’ve always got spares is all.
You have to remove all six screws one in each corner under rubber bungs and two centre bottom under shaped bungs. Trim then unclips if you carefully pull it from the inside edge (screen side outwards).
The only area that can take a while is around the switches because there is some double sided tape in that area, sustained gentle pulling is all that’s required. Make sure laptop lid is almost fully open to help get the bottom area unclipped.
It does come off very easily, but is hard to explain in text. just perceiver carefully don’t try levering it with tools on outside edge, fingers are all you need I open them up all the time to replace broken screens, and it’s much safer than using tools near the delicate easily scratched screen ......