hi, it should be fairly simple to install the new screen, at the bottom near the keyboard, remove those 2 rubber grommits on the bar which hosts the caps and num lock lights, remove the 2 screws, pop the plastic frame apart around there, then remove all the four rounded rubber grommits on the plastic surround, i suggest using a very thin strong knife to run along the seem to pop open the catches, work your way down from the top end, and be in mind that on your nav buttons i.e. camera capture, be careful as there is a sheet of double sided tape, just gently pull apart there, then once you’ve got this all apart its fairly simple, just undo a few screws, and disconnect the wires from the mobo, by removing the keyboard and plastics, also just wondering, how much would you want for the plastics and camera, does the camera still work? i have a paypal account if its simpler for you, Hope that helps for the moment, im sure there are plenty of pics on this forum to guide you :o
