HI All,

I’ve been through the patch guide from luchao18 and have it working. At first i had the 30 days problem then i downloaded the drivers from   and did the following steps:

1) Went to Control Panel, Add Remove program, removed the previous toshiba stack

2) Unzipped the lu100btstack.exe file, then copied the tosrfusb.inf modified to the windows inf folder in the unzipped folder and install the new stack.

NOW I DON’T HAVE ANYMORE THE 30 DAYS LEFT LEGEND !!!!!

Thank you all for the effort and help to solve this problem.

Regards
fgonzampai

I managed to install widcomm and jabra jx10 on a T2XP, but have issues
with choppy/stuttering sound with skype. I also cannot use the high quality
sound driver with it. When looking at the technical call info I see a audio
correction of 98-99%(!)

I also tried with the Toshiba as recommended in the guide but same result.

Streaming radio with winamp works fine, so does the tests in sound and audio devices. The jx10 also works fine on another laptop.

Anyone have any clues of what it could be?

[quote author=“Anonymous”][quote author=“Thankful guest”]My VGN-T250 now works with the Toshiiba Stack and a Sony Ericsson HBH-600, which I have had for 6 months.

I followed the instructions on page 1 step by step, and used the Stack Version 3.20.01 (link in above post, thanks).  There is no 30 day limit.

The only problem I encountered was that I had to switch the bluetooth/wireless button off and on, in order to patch successfully (patch.bat and a2dp.bat, see page 1), although I stopped (not disabled(?)) the bluetooth service as described in the instruction.

Thank y’all for all the information. :D

ackownleged, will add to the instruction, with download link of the updated(downgraded? ) driver version.
I won’t be coming too often to this forum anymore as my tr5b refused to boot after a year and a month of careful use, just passed the warranty period, sony inspected it and charged me 700USD for replacing the motherboard! those bastxxxs! i have since switched to fujistu camp (P7120), as i’ve heard a lot of good things about their cs.

experienced forum members pls help those with any patching issue. 8)

cheers

hey guys
i’ve done it until before Install SONY (Toshiba OEM) stack:

i can’t seem to get the stack installed. it just keeps can’t find the bt adapter. and the dialogue asking me to on the bt adapter keeps popping out. what is the matter? what should i do?

help would be appreciated… thanks

hey peeps i have a sony vaio t350 and followed the guide to the T and got everything to work. Problem is my bluetooth manager doesnt look like the authors has toshiba on the right hand corner instead of bluetooth is anyone else like this i dled from the link he posted. Also scms-t is not unchecked by default i do not even have the option to uncheck it cause i dont see it anywhere??? If anyone has similar problems and can help please reply

Hi.
I have an ISSC dongle and try to use it with toshiba BT stack.
I’ve modified tosrfusb.inf by adding these lines:

%TosrfUsb.DeviceDesc2%=TosrfUsb_Device,  USB\Vid_1131&Pid;_1001
ExcludeFromSelect = USB\Vid_1131&Pid;_1001
MSFT = “ISSCBTA”
StdMfg = “ISSCBTA”

I’m trying to connect my Sony Ericsson k750i with computer.
I’ve done everything step-by-step, but still get the “29 days left” message.
I have BT Stack for Windows 4.xx
When I try to install the 3.xx version (lu100btstack.zip) I get the following error:

InstallShield Wizard Completed.
The wizard was interrupted before Bluetooth Stack for Windows for Toshiba could be completely isntalled.
Your system has not been modified. To install this program at a later time,  please run the installation again.
Click Finish to exit the wizard.

HELP![/img]

I have everything working great except that I bought a Motorola Stereo 820 headphonews and get that error when i even try to pair the thing. Where do I go for this check box that it says I must uncheck ???? What do I do with this ??? Thanks.

Hey guys I am a proud owner of a Sony Vaio VGN T350P for over a year now and always wondered how to get my Motorola HS820 audio headset to work but never could. Luckily i found this website and followed the directions of this thread and finally got my bluetooth working properly. So now i am sharing my experience with you guys. I found a way to get the newest toshiba stack version 4.20.36 working with the TX. Which i think is way better than the old one 3xx i believe. If anyone wants any details i’ll post the links or upload the necessary files. As a matter of fact im listening to mp3s on the motorola 820 as we speak nice headset by the way

Heres a picture

This the full version none of tha 30day evaluation crap

Also there is no SCMS-T Copy right problem either

:D

Hey Dany, how did you get away with not getting the trial message ? I grabbed the new stack and it is better, then applied the reg patch for the copywrite, but I get the 30 day trial message. Do you have a patch for that too ????? Thanks.

Never mind,,,,,,ran the crack and is all good now, thanks.

This is such a nice stack I wish I could get it running on my big PC, might try it later;-)

So did you get it working or not anyways here is the link to the patches to get rid of the evaluation period and registry fix for the scms-t copy right. after you are done installing and it ask you to reboot put no and run the patch and reg fix. This patch works for all version 3xx-4xx

Also if anyone wants i hacked the bluetooth version specificly made for the new Vaio TX notebooks. It doesnt say toshiba in the bluetooth settings window it just says bluetooh. I compared it to my brothers bluetooth stack on his sz and its exactly the same. LMK if anyone is interested

k.. this is getting more and more confusing for me.. hope one of you can help me out here..
i took the blusoleil route.. installed everything, including the voip 2.3 std
i can even manage to connect to jabrabt800, the headset rings and i can pick up when i first connected…
but the problem is, i cant hear anything, nor i can speak into the mic..

help??

say i wanna uninstalled all the bluesoleil, and start fresh using widcomm, any particular steps i should take? or just basically undo all my steps?

thanks in advance..

Using your howto basics and my own cooking, I could install Toshiba v5 on my S3XP running Vista !